Did you just have your tub or shower enclosure reglazed? You’re probably wondering how long you have to wait before you can use it again.

You’re in the right place because for this blog, we will be discussing how long you have to wait before you can use your tub or shower again after it has been resurfaced or reglazed.

How Long Does a Tub or Enclosure Dry?

Professionals use different kinds of materials to reglaze a surface. Some of them use urethane, polymer and epoxy materials to repair and recoat a surface. One of the ways to find out how long before you can use a shower or tub is to ask the refinisher for the type of glaze they used in your bathroom.

For example urethane, a high quality reglazing product, takes around 15 minutes to dry upon application. The top coat usually takes around 24 to fully harden which means you can use your bathroom after 24 hours.

Polymer on the other hand takes longer to dry at around 30 minutes after application with the top layers fully hardening after approximately 48 hours so your tub or shower will be ready after that.

What is Curing Time?

Curing time refers to the time it takes for a glaze to reach maximum hardness after application. As stated above, different materials have different curing times. 

Generally speaking, most coats take up to 24 hours to feel totally dry and can take up to 7 days to cure.

Temperature also plays a factor in curing time. The best time to have your bathroom resurfaced is when temperatures are above 62 degrees Fahrenheit. Working below this temperature can affect the quality and strength of the glaze as well as drying time.

How Long To Wait To Use A Tub or Shower After Reglazing?

So, if drying times and curing times are different, how long do we wait before using a shower or tub after reglazing?

While you should wait at least 7 days for your shower or tub glaze to cure, taking a shower 48 hours after your Boynton Beach shower reglazing service should be fine but hold off on soaking in the tub for a week.

You should also wait the full week before attempting to clean the shower enclosure or tub. 

Conclusion

To be on the safe side, better wait at least 48 hours before taking a shower in your newly reglazed shower enclosure or tub. Waiting for the prescribed time will allow the surface to cure and make the glaze last many years. 

FAQ

How long does it take to Reglaze a bathtub and shower?

The answer depends on several factors like the weather, prep work like covering excluded areas and the condition of the shower or tub. A typical reglazing project can last 2-4 hours but sometimes it can take half a day. 

Is it better to Reglaze or replace a bathtub?

It depends. If your tub is still in good working condition and you don’t want to change the plumbing, flooring or fixtures then reglazing is a cost-effective solution. It can restore your tub and get rid of minor imperfections like scuffs, stains and chips. However, if your tub is suffering from major damage like leaks or broken beyond repair, then it might be better to replace it.